Showing posts with label sheath making. Show all posts
Showing posts with label sheath making. Show all posts

Wednesday, 15 June 2016

New knives and new designs WIP - Canadian Belt Knife ( 3/?)

Times are busy, but there's still always time for knife making! The scales and knives have been glued together and I've completed the first knife of the batch. There isn't too much that I have done differently from previous knives, so I'll let the pictures speak for themselves - enjoy! 


Front of  scale shaped for gluing. From left to right - black canvas micarta, African blackwood, chatke viga, osage orange, natural canvas / black paper micarta.

Attaching scales
The first knife that I completed was the Canadian belt knife that a colleague of mine requested for a fathers day present. Below are some shots documenting the process.

Handle shaping on the 2x72" grinder. The wood is osage orange 

Finishing and sealing scales.

Starting the sheath - this is the first one piece sheath that I've done. 


Stitching the belt loop - extra care needs to be taken in sinking the stitching into the leather prevent the knife from cutting the thread.



Attaching the welt - in this case the welt needed to be built up near the handle to accommodate the handle thickness.

Alignment with finishing nails prior to gluing and stitching.

The whole package done! 







Backside of the completed sheath  sealed with leather conditioner and hot wax.

Wednesday, 30 December 2015

Christmas Break Project: Hultafors Axe Sheath

As promised - part two of my Christmas project!

This would be my first attempt at a sheath for an axe still in production - so hopefully it will allow me to work on future projects with this model.

The process I used was similar to the axes that I have done in the past. The leather used is 7-8oz vegetable tanned leather, saddle stitched, and reinforced with double capped rivets at high stress points on the corners of the welt.  The only difference between this sheath and the ones the previously is that I used line 20 size rivets as opposed to 24 for the horizontal flap to be in line with the size of the sheath.

Transferring my CAD template to leather


Adding my makers mark


All dyed and ready to punch and glue.

Saddle stitching


And now for the finished product: 




Hopefully Chris the sheath is to your liking, it will be making its way back to you soon!

On a side note I have also made a pair of stainless steel firesteels that will be available on my website - a bit of an experiment between a larger handle and very compact handle.  Get em while they're hot!




Saturday, 26 December 2015

Christmas Break Project: Hultafors leather handle guard

Happy holidays everyone!

Just thought I'd document some work that I'm doing for a customer I've been in contact with over the holiday break. The request was to make a leather sheath and leather handle guard for a Hultafors classic axe. I've made a number of axe sheaths in the past, but a leather handle guard would be a first for me and a fun challenge. 

There are a number of different ways a leather guard can be attached, using either paracord and eyelets to fasten it temporarily or with skein to permanently attach it to the handle, and a number of stitching methods such as cross stitch and whip stitch. I opted to go the permanent route and chose to use a baseball stitch to minimize the amount of exposed thread for durability. 

Normally when leather working I would attempt to make a template to minimize the amount of leather wasted  , but in this case it was more trouble than it was worth to try to wrap a piece of paper around the handle to get an idea of how much leather was needed. I dyed the leather with gel antique and clamped the leather down around the handle in a vise to get an idea of how much excess there would be, followed by alot checking and trimming to get the final shape.  

The final form was then dipped in wax to give it rigidity and waterproofing, then punched out for lacing with artificial sinew. One important learned while working with artificial sinew on oddly shaped pieces - get appropriately shaped needles and ones with an appropriate sized eye or you're going to need to buy more needles haha. 

The process of executing a baseball stitch is well documented in tutorials for upholstery - but below are a few pics of how I went about it. Nothing too fancy, it's like doing two whip stitches that cross one another - just make sure you tighten everything up as you go along. 




Something I probably should have documented was how to finish the stitch, but I'll the best I can to explain it and that it shows in the final picture. After reaching the last holes, double back to the second last holes, then tighten up the final loops at the end of your piece and tie the two threads together ( I used the beginning of a snake knot) as close as you can to the leather. Use a curved needle to pull the loose ends under your existing stitches to pull both the knot and the loose ends underneath ( about 4-5 stitches should be good), then carefully trim the excess. The result should be a clean final stitch where the loose ends are essentially invisible, and more importantly - protected from fraying or loosening. 

At the end of the day, the final product should be snugly to the handle with the stitches and if tightened sufficiently, slightly sunken into the leather. For extra measure I added a coating of my home made leather finish covered in my other posts, and gave the stitches a pass with a lighter to remove any frays or stray strands. All in all I think this was a successful attempt, although personally I think the stitching can be more even with practice. All that said , I'm confident that it'll serve the customer well and give the axe a classy appearance to match with the leather sheath that I will be covering shortly. Stay tuned! 






Monday, 26 October 2015

Short Thanksgiving Weekend Project (2/2): Minimalist city knife attempt #2

Just a short post on the sheath making process and some pics of the finished product. The sheath like the previous iteration is made from vegetable tanned leather, and was also made to accommodate the blade in more than one orientation to avoid accidental sheath damage.  I also attempted to make the welt for the knife somewhat thinner than the other city knife, since the overbuilt welt made the sheath somewhat bulky for the size of the knife. Since the welt was thinner however, I felt that it wouldn't hold up to use as long, I applied some full concentration acrylic resolene to try to toughen up the inner surface.  Thus far that treatment held up well for the axe sheath I made a few months ago, so hopefully it'll be more than enough for a simple light duty knife!

Punching the holes with a stitching chisel to set spacing for drilling with the drill press. 

Adding my makers mark to the back of the sheath. 

All the  components drilled and prepared for gluing and stitching! 
The welt was left oversize to minimize was from final edge finishing and getting all the layers flush with one another - easier to cut away than to add!

Saddle stitching - 1 out of 135 to go 

All stitched up and ready for final surface finishing - I applied both paraffin/ beeswax along with the neatsfoot oil/ resin/ wax mixture from my previous post on axe refurbishing. The saddle tan gel antique dye in the leather seems  to darken significantly after all the finishing and should be taken into account if you want something lighter! 

Burnished edge - the edges of the sheath were lightly chamfered using an edge beveller, after which chocolate brown leather dye was applied and run over with my home made dogwood burnishing tool. Nothing too special with the process there - wax it lightly or just dampen with water and rub it back and forth until it's the desired shape and the layers are well blended, then seal with the wax finishes. 

And now the glamour shots:



(probably the thinnest edge that I've put on a knife, no idea how thick it is but the width of the secondary bevel is barely visible) 




All in all I think this project was a success - and it'll serve many years peeling apples and opening letters. Overall, the slight changes to both the knife itself and the sheath are significant improvements over my last city knife in terms of both ergonomics and overall appearance, and I look forward to making more of these , maybe out of AEBL if time permits for a batch of them - hopefully not too far away in the future!  

Tuesday, 21 July 2015

Axe Refurbishing WIP: Round Two

Hi all,

Haven't had as much time to work on projects as I'd like - but I did find a few breaks to get another axe restoration done! This time around it's a Walter Black Diamond. Doing a little homework I found out that these were among some of the finest axes made in  their time, and made in Canada! In it's original condition it looked like the owner knew what they were doing as far as taking care of tools went - edge geometry was well maintained , pitting was not too deep and the head didn't have a trillion nails for wedges stuck in it.

The handle also seemed ot be in fairly decent condition - I'll have to admit I felt bad for destroying something that was likely over twice my age, but I didn't want to take any chances with cracks of any decay which may have been occurring inside.
Great grain orientation - I can't imagine how long it took for all that linseed oil to build up that deep into the wood
 After some light filing on the poll to remove some minor mushrooming. I used electrolysis to remove the bulk of the rust.



Clean up and sharpening were more or less the same as the previous axe restoration on the True Temper, and it was onto the fitting. I fitted the head with a shorter house axe handle (~19") so that I would be able to take it on long hikes and have it be too bulky. For the size of the head, the handle was a bit short, but I figured it would do. The only thing different I did this time from the previous axe was in the finishing, leaving it at 220 grit and applying a 50/50 mix of  paraffin melted into paraffin for waterproofing. I find this method is certainly faster than applying X number of layers of linseed oil, since it takes very little time to polymerize and is fairly robust.

The axe sheath was also done similar to the previous, with the exception being that I used double cap rivets instead of chicago bolts on the areas subject to the most stress and saturated the welt with acrylic resolene to increase its cut resistance. The final finishing was also tweaked from the previous, which only used paraffin.








My original plan in finishing of the areas subject to movement was to use something called Obenauf's Leather preservative, but  being a Canuck in Canada, specialty items are tougher to get unfortunately.  After doing some research on the product, it appeared to be a mix of beeswax, propolis (bee derived resin), and some mix of oils.  To make the next best thing, I improvised and melted up some mink oil, wax, and cleaned spruce resin collected from the front yard to make a balm like concoction. The mink oil was to act as  lubrication for the leather fibers, resin as a preservative and waterproofing agent (hopefully), and the wax was for waterproofing and to tie it all together. So far results have been promising, providing decent waterproofing and buffing to a high shine, but only time will tell. Gotta love the forest-y smell though!

about 3 oz of cleaned spruce resin - the original volume in raw form was about four to five times as much due to a large proportion of air in the sap - do not melt this stuff indoors!! 
final leather finish product after mixing resin with wax and mink oil- it looks solid but is still very soft at room temperature, think lip balm in terms of consistency